1. Flexible material selection plan
The mixer can be customized with carbon steel, manganese steel, 304 stainless steel, 316L stainless steel, 321 stainless steel, and other materials, and different materials can also be used in combination; When selecting equipment materials, distinguish between parts that come into contact with the material and parts that do not come into contact with the material; Functional coatings or protective layers such as anti-corrosion, anti bonding, isolation, and wear resistance can be added specifically to the interior of the mixer; The surface treatment of stainless steel includes sandblasting, wire drawing, polishing, mirror finish and other treatment methods, which can be applied to different parts of use.
2. Reliable driver configuration
The mixer is equipped with driving devices with different abilities, powers, and output speeds based on the properties of the materials, starting methods, and mixing methods. Due to the meshing relationship of the internal blades, the dual axis drive power of the dual axis non gravity mixer needs to have synchronization ability. Four drive combinations are available for different capability requirements: dual gearbox synchronous combination, single gearbox dual output, dual planetary gear synchronous, and bridge sprocket chain.
The Sk series dual gearbox synchronous combination is an excellent configuration method for gravity free mixers.
3. Effective mixing device
The gravity free mixer can adaptively adjust the dual axis blades according to different material properties.
For example, adding wear-resistant stirring blades, PTFE stirring blades, serrated stirring blades, and other non gravity mixers can add high-speed crushing shafts inside the cylinder to disperse the mixed material flow.
4. Good feeding device
The conventional configuration of a gravity free mixer includes a double door flip plate large opening discharge valve and a curved flip plate valve, which fully conforms to the curved surface of the cylinder, ensuring that there are no dead corners in the mixing process and making the mixed materials uniform.
5. Tight dynamic shaft seal
There are three commonly used sealing modes for mixers: packing seal, combined gas seal, and mechanical seal;
Used to solve spindle seals in the form of particles, powders, micron sized powders, liquids, and slurries.

Model	WZL-0.3	WZL-0.5	WZL - 1	WZL - 2	WZL - 3	WZL - 4	WZL-6	WZL - 10	WZL-15	WZL - 20
Effective volume m ²	0.18	0.3	0.6	1.2	1.8	2.4	3.6	6	9	12
Each production is in kilograms	200	300	600	1200	1800	2500	3600	6000	9000	12000
Speed r/min	60	60	53	43	43	35	35	29	22	18
Motor power KW	5.5	7.5	11	15	22	30	45	55	90	150
Equipment weight KG	650	900	1300	2300	2800	3400	5000	6000	8500	12000