China Production type dual planetary mixer Factory,Xinyang Equipment,Low Price,dual planetary mixer Free Delivery

Production type dual planetary mixer

Send Inquiry +86 158 5279 6716

Product introduction

The dual planetary mixing mixer is a mixing device that mixes, dissolves, disperses, and homogenizes various liquids and powders. It consists of a reduction motor, a cover, a planetary carrier, high-speed, low-speed, and movable scraper shafts, a scraper, a material bucket, a dual column hydraulic lifting system, a vacuum system, and a frame. The dual planetary mixer can work under vacuum and continuously discharge water and other volatile substances, making it suitable for use as a degassing kettle. The material bucket can be heated or cooled by oil or water circulation as needed; Steam heating can also be used. The heating temperature is displayed through the temperature controller on the control panel. Planetary disperser mixer (planetary mixer) is applied to high viscosity batteries, coatings, organic silicone, inks, dyes, adhesives, etc.

Working principle

The dual planetary dispersing mixer has high-speed, low-speed, and movable scraper blades for stirring, shearing, scraping, and dissolving. The low-speed operation of the mixing anchor causes the material to flip, shear, and mix up and down in a closed container. The high-speed operation of the toothed dispersing disk produces strong collision and shear with the mixed material. As the mixing anchor rotates, the movable scraper on the planetary carrier rotates to completely scrape off the material on the kettle body, ensuring that the aggregates meet the requirements of mixing, dispersion, and dissolution completely and thoroughly. Under its different effects of high and low speeds, the material can achieve uniform mixing and dispersion.

Scope of application

1. Energy: various battery slurries and pastes (lithium batteries, nickel chromium batteries, nickel hydrogen batteries, fuel cells, power batteries, etc.);
2. Electronic appliances: solder paste, ceramic paste, magnetic materials, silicone ink, electronic adhesive, PVC plastic, electronic appliance sealing adhesive, hot melt adhesive, various precious metal powders and pastes;
3. Chemicals: various sealants, adhesives (silicone sealant, polysulfide sealant, polyurethane sealant, hollow glass sealant, waterproof sealant, structural sealant, anaerobic adhesive, stone adhesive, mold adhesive, etc.), synthetic resin rubber, ink, putty, abrasives (paste), wax products, synthetic rubber, synthetic resin, various powder materials, ceramic pigments;
4. Pharmaceuticals: various soft ointments, high polymer gel (medical patches, children's antipyretic patches, cold quick patches, ice patches, eye patches), dental products;
5. Cosmetics and daily chemicals: skin cream, lipstick, lipstick, lotion, gel, facial mask, eye black, foundation make-up, nail polish, toothpaste, soap;
6. Food: a mixture of various paste and paste like substances, seasonings, jams, chocolate pastes;
7. Applicable viscosity range is around 10000-100000CP.

Performance characteristics

Efficient mixing
Efficient and multi-purpose equipment that integrates reaction, mixing, refining, and dispersion; The stirring blade inside the kettle rotates while revolving, causing the material to flow up, down, and around, thus achieving the mixing effect in a very short time. There are no dead corners during the mixing process, and the effect is more than ten times that of a regular mixer;
precision machining
The stirring blade is cast in one go, with a gap of up to 2mm between the blades, 1-2mm between the blades and the bottom, and 2-3mm between the blades and the bucket wall; The inner wall of the barrel is precision machined by a lathe, and then automatically polished by a large polishing machine to ensure that the movable scraper on the paddle completely hangs off the material on the inner wall of the kettle when rotating;
Accurate temperature
The barrel is equipped with a jacket, which can achieve heating/cooling and insulation functions; The kettle body can be heated by electricity, oil, water, and steam circulation. There is a unique temperature detection device on the transmission shaft, which is in direct contact with the material to ensure accurate temperature;
Vacuum holding pressure
Mechanical seals, dynamic seals, and O-ring static seals enable a vacuum degree of -0.098MPa and high vacuum degree retention;
Optional Strong
A variety of mixing forms are available: single axis dispersion, single axis emulsification, double Fried Dough Twists frame mixing, frame mixing, paddle type, claw type, etc;
Flexible operation
Control panel: equipped with power indicator light, digital speedometer and speed adjustment knob, mixing start stop button, lifting, emergency stop button, spotlight, vacuum device, temperature display, etc;
High safety factor
Temperature display system, vacuum pressure holding system, current overload protection system, equipment positioning system;
High degree of automation
Integrated control of speed, lifting, vacuum, temperature, formula, etc. can be achieved through PLC interface.

Application industry

Electronic electrode slurry, lithium-ion battery slurry, bonding, mold adhesive, silicone sealant, organic silicone, polyurethane sealant, anaerobic adhesive, etc.

Product parameters

Model	Volume	Mixing tank diameter	Dispersed power	Rotational speed	Stirring power	Revolution	Rotation	Lift stroke	Dispersion disk diameter
	L	mm	kw	rpm	kw	rpm	rpm	mm	mm
NYXJ-20	20	350	1.5	2900	2.2	62	95	450	70
NYXJ-30	30	400	2.2	2900	3	83	82	550	80
NYXJ-60	60	500	11	2880	5.5	50	80	650	110
NYXJ-100	100	596	15	2880	7.5	60	90	800	110
NYXJ-200	200	750	22	2840	15	52	83	900	150
NYXJ-300	300	836	30	2500	22	40	65	1000	150
NYXJ-500	500	1000	45	2240	37	35	56	1200	200
NYXJ-1000	1000	1266	75	1440	45	40	65	1400	250

Model	Volume (L)	Cylinder diameter (MM)	Mixing power（KW）	Distributed power（KW）	Dispersed rotational speed（RPM）
HRXJ-100	100	600	7.5	11	3000
HRXJ-200	200	720	11	22	3000
HRXJ-300	300	820	22	30	3000
HRXJ-500	500	1000	37	45	1440
HRXJ-1000	1000	1266	45	55	1400

Note: The above technical parameters are for reference only and can be customized non-standard. Different configurations can be made according to actual needs!

Prev： V-mixer

Next： None

◇◇Related products◇◇

Production type dual planetary mixer