Product introduction
A laboratory style planetary mixer typically consists of two mixing blades and one scraping blade. The two planetary mixing blades rotate around a common axis along the container wall while also rotating around their own axis. The blades rotate forward around the inner wall of the container, constantly carrying away the material from the container wall and bringing it to the middle. After one revolution, the blades have already passed through the entire container. After three revolutions, most of the material has been fully mixed, and after only 36 revolutions, all the material is completely mixed.
Performance characteristics
1. Workbench hydraulic bucket type, integrating mixer and material press, no need for human bending operation;
2. Processing capacity of 0.3-10L;
3. Extreme negative pressure -0.098Mpa, high vacuum retention;
4. Temperature controllable, accuracy ± 1 ℃, range: 0-220 ℃;
5. Low speed kneading and mixing, combined with high-speed dispersion, are carried out simultaneously without any dead corners in the mixing process;
6. Multiple mixing forms: Fried Dough Twists frame, claw type, door frame type, paddle type, etc;
7. Fine processing, low gaps between the stirring blades, and between the stirring blades and the kettle wall and bottom.
Application industry
Mixing, crushing, dispersing, etc. of high viscosity and high solid content materials.
1. Resin types: epoxy resin, polyurethane resin, acrylic resin, hot melt resin;
2. Organic silicon: organic silicon materials, silicone oils;
3. Battery slurries: lithium battery slurries, positive and negative electrode materials, separators, conductive slurries, etc;
4. Adhesives: sealant, construction glue, viscose, white latex, hydrogel, etc;
5. Electronic adhesive: thermal conductive adhesive, conductive adhesive, flame retardant adhesive, etc;
6. Polymer composite materials, carbon fiber materials, etc;
7. Petrochemical industry: anti-corrosion and anti rust coatings, solder paste, ceramic slurry;
8. Medicine: External application, oral medication.
Product parameters
Specifications: HRSXJ-0.5, HRSXJ-1, HRSXJ-2, HRSXJ-5, HRSXJ-10;
Structural form: floor standing hydraulic bucket type; Equipped with a sealed vacuum; Equipped with temperature display; Single dispersing shaft, dual stirring shaft, with scraping wall, temperature measurement;
Mixing part: double Fried Dough Twists frame mixing;
Power: 0.75/1.1/1.5/2.2Kw;
Power supply: 380V 50Hz 4P;
Mixing form: spiral Fried Dough Twists frame type, 2 groups, SUS304/316L material, mixing paddle is cast integrally;
Shaft self rotation speed: 0-110 rpm, adjustable;
Shaft rotation speed: 0-80 rpm, adjustable;
Gap value: mixing slurry and mixing blade tolerance: 1-5mm;
Mixing slurry and bottom tolerance: 1-3mm;
Mixing slurry and barrel wall tolerance: 1-3 mm;
Scraper blade: made of SUS304/316L and Teflon materials, with the same speed as the revolution speed;
Mixing section: single axis high-speed dispersion;
Power: 1.5/1.5/2.2/3Kw;
Power supply: 380V 50Hz 2P;
Speed: 0~3800 rpm, variable frequency speed regulation;
Dispersion disk diameter: Φ 40/55mm SUS304/316L material;
Bearings: NSK/SKF products from Japan;
Mixing container:
Effective volume: 0.5/1/2/5/10L;
Design capacity: 1.1/2.5/4.2/8.2/14.2L;
Inner liner material: SUS304/316L；
Sealed: The flange surface on the mixing drum is sealed with the upper drum body through a sealing ring;
Processing: After turning and processing the inner liner wall, it is mirror polished to ensure good roundness;
Jacket: a three-layer two jacket with a guide plate, which can circulate cold water or hot water (steam or hot oil);
Vacuum system: The stirring process is carried out in a vacuum state; Vacuum degree: ≤- 0.098Mpa； Maintain pressure for 24 hours;
Vacuum can be applied while stirring for better degassing and defoaming effects;
Electronic control system: manual control panel: power indicator light, speed adjustment knob and speed display meter, mixing/dispersing start/stop button, lifting/emergency stop button, spotlight, vacuum device, timer, etc;
Optional: PLC LCD screen control;
Safe operating system: mixing protection, positioning protection, vacuum protection;
Pressing machine: standard pressing machine, placed on the workbench.
