The 80L dual planetary mixing mixer is a type of non dead point mixing and stirring equipment, which has a unique and novel mixing form. There are two or three multi-layer blade mixers and 1-2 automatic scrapers in the kettle. The mixer revolves around the axis of the kettle body while rotating at different speeds around its own axis, causing the material to undergo complex movements inside the kettle body. Traditional planetary mixers are mostly composed of two low-speed mixing blades, also known as dual planetary mixers. But with the increasing demand, planetary mixers have also added other mixers, such as various types of dispersing blades, emulsifiers, and so on.

Mixer	Design volume	80L
	Working volume	64L
Low speed mixing system	Stirring power	7.5KW
	Revolution speed	0-65rpm/min
	Rotational speed	0-95rpm/min
	Mixing blade form	Spiral fried dough twists
	Material	304 stainless steel
High-speed decentralized system	Strong dispersion speed	2000rpm/min (adjustable)
	Distributed motor	5.5KW
	Dispersion disk diameter	100mm
	Material	304 stainless steel
Scraping the wall	Quantity	1 group
	Material	SUS304 and Teflon
	Speed	Consistent with the planetary revolution speed
Lifting system	Power up and down	1.5 Hydraulic
	Elevating height	600mm
Vacuum system	Vacuum power	1.5kw
	Vacuum degree	≤－0.098Mpa
Jacket	Double layered jacket, can be heated or cooled by water or oil

1. Energy: various battery slurries and pastes (lithium batteries, nickel chromium batteries, nickel hydrogen batteries, fuel cells, power batteries, etc.);
2. Electronic appliances: solder paste, ceramic paste, magnetic materials, silicone ink, electronic adhesive, PVC plastic, electronic appliance sealing adhesive, hot melt adhesive, various precious metal powders and pastes;
3. Chemicals: various sealants, adhesives (silicone sealant, polysulfide sealant, polyurethane sealant, hollow glass sealant, waterproof sealant, structural sealant, anaerobic adhesive, stone adhesive, mold adhesive, etc.), synthetic resin rubber, ink, putty, abrasives (paste), wax products, synthetic rubber, synthetic resin, various powder materials, ceramic pigments;
4. Pharmaceuticals: various soft ointments, high polymer gel (medical patches, children's antipyretic patches, cold quick patches, ice patches, eye patches), dental products;
5. Cosmetics and daily chemicals: skin cream, lipstick, lipstick, lotion, gel, facial mask, eye black, foundation make-up, nail polish, toothpaste, soap;
6. Food: a mixture of various paste and paste like substances, seasonings, jams, chocolate pastes.

The characteristics of the vacuum planetary mixer are: the main engine adopts a planetary gear reducer design, low noise, high mechanical efficiency, which can save power usage and reduce equipment space occupation. This machine is suitable for the mixing, reaction, dispersion, dissolution, and conditioning processes of multi-component solid solid, solid-liquid, and liquid-liquid materials required in industries such as chemical, light industry, food, battery, pharmaceutical, building materials, and pesticides. It is used for the preparation of various highly viscous substances such as inks, pigments, adhesives, sealants, encapsulating ointments, paste materials, lubricants, paints, paste like cosmetics, and additives. The viscosity range for use is around 10000-100000CP. The form of the mixer can be multi-layer blade type, frame type, butterfly type, outer wheel type, etc. according to the material requirements. Compared with ordinary mixers, it has the following advantages and disadvantages:
advantage
High efficiency, its mixing principle determines its stronger mixing efficiency than ordinary mixers.
Widely applicable, research has shown that planetary mixers can be suitable for most materials with viscosity of 1 million pcs and solid content below 90%. Combined with various mixers and other auxiliary devices, it can completely replace most ordinary mixers on the market.
disadvantage
The structure is complex, and planetary mixers usually achieve planetary motion through planetary gear transmission. The transmission box structure is complex and difficult to maintain. Usually accompanied by noise issues.
The price is high, and both the transmission box and the blade bucket require precision machining, which is much higher than that of ordinary mixers.